The module is a digital output module that is equipped with 4 opto-triac outputs using phase-angle control. L and N are fed to the module for zero-crossing detection.
SIMOTICS S-1FL6-1FL6 Operating voltage 3AC 400 V Pn=1 kW; Nn=2000 rpm M0=6 Nm; MN=4.78 Nm Shaft height 65 mm, with angle plug; incremental encoder 2500 incr./rev. with feather key, tolerance N without holding brake Degree of protection IP65 with sealing ring compatible with the converters SINAMICS V70 & V90
Bently Nevada 84661-33 Can be widely used in large rotating machines such as fans, compressors, pumps, etc. Measure the vibration of bearing seats, casings, etc.
Bently Nevada 3500/53-A03-B01 dynamic signal sensor vibration transmitter Bentley unit vibration monitoring can be connected to PLC or DCS systems, including 4-20mA current output and two-stage relay alarm output
Bently Nevada 3500/22-01-01-00 288055-01 dynamic signal sensor vibration transmitter Bentley unit vibration monitoring can be connected to PLC or DCS systems, including 4-20mA current output and two-stage relay alarm output
Bently Nevada 3500/92-01-01-00 dynamic signal sensor vibration transmitter Bentley unit vibration monitoring can be connected to PLC or DCS systems, including 4-20mA current output and two-stage relay alarm output
Bently Nevada 3500/33-01-00 dynamic signal sensor vibration transmitter Bentley unit vibration monitoring can be connected to PLC or DCS systems, including 4-20mA current output and two-stage relay alarm output
Bently Nevada 3500/45-01-00 dynamic signal sensor vibration transmitter Bentley unit vibration monitoring can be connected to PLC or DCS systems, including 4-20mA current output and two-stage relay alarm output
Bently Nevada 3500/42-01-00 By processing these signals, it can complete various vibration and position measurements, and compare the processed signals with the alarm values programmed by the user.
Bently Nevada 3500/25-01-01-00 By processing these signals, it can complete various vibration and position measurements, and compare the processed signals with the alarm values programmed by the user.
Bently Nevada 3500/15-02-02-00 By processing these signals, it can complete various vibration and position measurements, and compare the processed signals with the alarm values programmed by the user.
English
español
العربية
Indonesia
