SIMATIC S7-1500, analog output module AQ 4xU/I HF, 16-bit resolution accuracy 0.1%, 4 channels in groups of 1, common mode voltage: 30 V AC/60 V DC, diagnostics; substitute value, isochronous mode; the module supports the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061
SIMATIC S7-1500 analog input module AI 8xU/I HF, up to 24 bit resolution, accuracy 0.1%, 8 channels in groups of 1; common mode voltage: 30 V AC/60 V DC, Diagnostics; Hardware interrupts Measured values scalable, measuring range adjustment, Calibrate in RUN; Delivery including infeed element, shield bracket and shield terminal: Front connector (screw terminals or push-in) to be ordered separately
The F-series FENA-21 is a 2-port Ethernet adapter supporting several communication protocols: PROFINET IO, EtherNet/IP and Modbus TCP. The selection for the protocol is done via a parameter in a drive.
Allen-Bradley 1788-CN2DN ControlNet-to-DeviceNet (CN2DN) linking device. The 1788-CN2DN connects a ControlNet network to a DeviceNet network. The DeviceNet network typically consists of multiple devices, such as RediStation’s, photoeyes, etc. The ControlNet network consists of controllers, such as Logix or PLC-5 processors, HMIs, drives, I/O devices, etc
The EL7342 EtherCAT Terminal enables direct operation of two DC motors. It is galvanically isolated from the E-bus. The speed or position is specified by the automation device via a 16 bit value.
BMENOC0321 Ethernet communication module, Modbus TCP and EtherNet/IP, 10/100M, 3 RJ45 Ethernet ports, with routing function, only supporting M580 CPU and using Ethernet backplane
English
español
العربية
Indonesia
