The KL3351 analog input terminal permits direct connection of a resistor bridge. The bridge voltage, UD, and the supply voltage, UREF, to the bridge are digitized with a 16 bit resolution, and are transmitted along an electrically isolated channel to the supervising automation system.
This motor bridge module is used to control 2 DC motors with a nominal voltage of 24 to 38.5 VDC ±25% at a nominal current up to 3 A. The module can be reconfigured and used in current controller mode for controlling inductive loads.
The bus receiver is used to connect the X20 System to the X2X Link. The module is equipped with a feed for the X2X Link as well as the internal I/O supply.
Bently Nevada 177230-01-02 -05 Can be widely used in large rotating machines such as fans, compressors, pumps, etc. Measure the vibration of bearing seats, casings, etc.
Bently Nevada 177230-02-01-05 Can be widely used in large rotating machines such as fans, compressors, pumps, etc. Measure the vibration of bearing seats, casings, etc.
Bently Nevada 330180-91-00 Can be widely used in large rotating machines such as fans, compressors, pumps, etc. Measure the vibration of bearing seats, casings, etc.
Bently Nevada 330500-02-04 Can be widely used in large rotating machines such as fans, compressors, pumps, etc. Measure the vibration of bearing seats, casings, etc.
English
español
العربية
Indonesia
